- #Installing winch on polaris sportsman 450 install
- #Installing winch on polaris sportsman 450 manual
- #Installing winch on polaris sportsman 450 pro
Lift the plow assembly, using the winch, until you hear the plow click into place on the ATV frame.ģ3. Continue to lift the plow up until the hook is nearly tight to the fairlead. This is the maximum height that the winch can lift the plow.ģ4. On rapid rope recovery winches, always use low gear.ģ1. Reinsert the key and turn the power on.ģ2.
Turn the winch to neutral and release the winch cable and hook.Ģ8. Before continuing, ensure the locking handle is pulled up to the unlocked position.ģ0. Once the hook is attached, re-engage the winch gear. Ensure the hooks on the mount are in place on both sides of the crossbar.Ģ7. Tighten the fasteners with a 15mm socket until fully seated.Ģ4. Insert the winch link into the frame behind the plow pivot, and thread on the fastener.Ģ5. Align the front hooks on the plow mount with the frame of the vehicle.Ģ6.
#Installing winch on polaris sportsman 450 install
The right pin should be placed in the hole closest to the frame.Ģ1. Before continuing, repeat this process on the other side.Ģ2. Fold both ends of the cotter pins so that they cannot be removed.Ģ3. Insert the lift handle through the bottom of the frame and install the fasteners. The longer pin should be inserted into the right side.Ģ0. Align the front of the plow mount with the rear of the frame.ġ9. Insert a spacer between the mount and inner frame bracket and slide a roll pin in from the outside to join the assembly. Remove the cotter pins and roll pins from the plow frame with a pliers.ġ8. Hook one end of the plow spring to the blade’s upper holes and fix the other end to the plow pivot using an eye bolt and locking nut.ġ5. Repeat this process on the other side.ġ6. Tighten the nuts with a 13mm socket to remove the slack.ġ7. Insert the bolts from the outside into the sleeve on each side and attach the self-locking nuts.ġ3. With a 19mm socket and wrench, counter-hold the nuts and tighten the fasteners until fully seated.ġ4. Insert the cotter pin, and fold both ends with a pliers so that it cannot be removed.ġ0. Place the plow blade face down against the ground, and position the plow pivot at the center of the blade.ġ1. Insert the flange sleeves on each side from the outside into the holes of the plow.ġ2. Align the other end of the mechanism with the plow pivot and locking bar, and insert the clevis pin.ĩ.
#Installing winch on polaris sportsman 450 manual
With a pliers, remove the cotter pin from the clevis on the plow pivot, and remove the clevis.Ħ. Align the rear of the manual angle mechanism with the hole in the side of the frame, and insert the clevis pin in from the top.ħ. Insert the cotter pin, and fold both ends with a pliers so that it cannot be removed.Ĩ.
#Installing winch on polaris sportsman 450 pro
To assemble and install the Glacier Pro Plow on your model year 2021 and newer Sportsman 450 or Sportsman 570, follow these steps:ġ. Remove the cotter pin and clevis pin from the main frame with a pliers.Ģ. Position the main frame to the center of the plow pivot, and insert the clevis pin through the top.ģ. Insert the cotter pin, and fold both ends with a pliers so that it cannot be removed.Ĥ. Use pliers to remove the cotter pin from the clevis on the side of the frame, and remove the clevis.ĥ. Put the vehicle in park, set the parking brake, and remove the key.Īlways wear safety glasses and nitrile gloves when servicing your Polaris vehicle. Before installing any accessories, ensure the vehicle is parked on a flat, level surface. The Glacier Pro ATV Plow Frame Kit is part number 2879630.
The Glacier Pro Poly Plow (66-inch) Kit is part number 2880269. The Plow Mount Kit is part number 2881424. To learn more about tools, read the Tools and Fasteners Guide.
0 kommentar(er)
